Assembly & Setup Instructions for the 12-needle HCS3-1201 Voyager

Assembly Videos

Instructions for assembling the optional stand and for unboxing and setting up the machine are provided here in a series of videos. These instructions work for both the HCH-701 7-needle Journey and for the HCS2-1201 Voyager. Note: If you do not have the optional stand, you can skip the first video and proceed to the machine assembly videos.

Instructions for Assembling the Optional Machine Stand

Setup Instructions for HCS3 1 of 3: Unboxing, Mounting on Stand

Setup Instructions for HCS3 2 of 3: Machine Assembly

Setup Instructions for HCS3 3 of 3: Thread, Installing the Arm, Power On

Preparing Your Machine to Sew - Videos

This series of videos will help you prepare your HCS3-1201 for sewing.  Shown in the video is the 7-needle HCH-701 Journey, but the procedure is very similar for the HCS3-1201 Voyager.

Getting Ready to Sew: Upper Thread Check, Bobbin Thread Check

Getting Ready to Sew 2: Power On, Loading and Setting Up a Design

Getting Ready to Sew 3:
Hooping Basics

Getting Ready to Sew 4: Oiling, Trace, and Actual Sew-Out