HCR3-1506 6-Head Embroidery Machine

HCR3-1506 6-Head Embroidery Machine Details

The HCR2-1506 is one of the most popular HAPPY multi-heads in the multi-head lineup, thanks to its unique combination of versatility and production power.  The 6-head is just 2 feet, 5 inches longer than the 4, and yet gives the operator the ability to sew 1 dozen pieces in just 2 runs!   HAPPY multi-heads are long-known for their quality and durability and the new HCR3 technology helps make the 1506 our strongest, most productive 6-head yet, with servo-driven main motors for faster, quieter sewing, and reinforced construction in many key areas for for greater durability and more consistent quality over a wide variety of conditions.


  • Servo-driven main motor for quieter, higher speed operation
  • New carriage base design for smoother, steadier operation at all sewing speeds
  • Improved sewing head powers through tougher sewing jobs
  • Large, user-friendly touch screen control with on-board help, auto-error correction
  • USB flash drive ports, LAN and USB direct PC connection ports, connection software included
  • 40 million stitch/999-design memory; organize designs in folders, pull designs from remote PC
  • Load & set up additional designs while the machine is sewing for max productivity
  • Automatic Color Change / 250 changes allowed per design
  • Make Design Adjustments On-The-Spot: flip/rotate, auto-repeat, fine-scaling, offset from center, and more
  • Automatic production & error reporting
  • Quick detachable support table (shown in photo)

Multi-Head Machines have a 10″ touch screen panel that is packed with features!


• The 10″ touch screen has a vivid LCD interface
• Easy Design Placement- Shows hoop as related to the design
• Displays your key sewing information at a Glance
• Customize your screen the way you want
• Easily place the Applications that you use most on the main screen
• One touch frame out for easy Applique
• Easy Design trace
• Full Built-in Networking and USB ports
• Auto Error correction for the most common issues
• One touch Firmware updates
• Advanced Control over every aspect of your sewing experience-
• Speed
• position
• Color Sequence/ Change
• And Much More!




HAPPY HCR3- 1506 Machine Specifications


(new HCR embroidery machines purchased from Texmac)

  • Full set of tubular hoops, 2 of each size per sewing head:
    • 12 x 12cm round hoops
    • 12 x 15cm round hoops
    • 12 x 18cm round hoops
    • 12 x 32cm square hoops
  • Full cap sewing equipment: quick-change sash and drivers, 12 cap hoops (2 per head).  Auto-design rotation on entering cap mode
  • Operator’s toolkit and manuals
  • Heavy duty casters and height-adjustable feet
  • Installation, setup, telephone and internet support from Texmac
  • 5-year limited warranty on all Happy HCR multi-head embroidery machines

Machine Performance Specs

  • Configuration: 6 heads, 15 needles per head
  • Max speed (normal) 1,100spm; cap sewing: 1000spm.
  • Max needle distance: 360mm
  • Memory capacity: 999 designs or up to 40 million stitches, 250 color changes per design

  Embroidery Sewing Field Per Head

  • Max needle distance: 450mm x 360mm (17.7″ x 14.2″)
  • Tubular frame field: 320mm x 320mm (12.6″ x 12.6″)
  •  Ballcaps: 80mm x 360mm (3.1″x 14.2″)

  Key Outer Dimensions

  •  Length: 9ft, 10in; Depth (D1=32.7in with table removed) (D2=52in; Height: 68.5in with thread rack, 59.5in without.)
  • Crated Dimensions: Length: 10ft, 9in; Height: 70in; Width: 44in
  • Weight: 1826 lb crated; 1408 lb uncrated

  Power Requirements

  •  Power type: 220v Single-phase, frequency 50/60hz
  •  Usage: ~410W*note: Dimensions and other specifications may be subject to correction.