This firmware update is compatible with the following models: HAPPY HCD2-1501, HCS2-1201 Voyager and HCH-701 Journey models with touch screen controllers. General instructions: (1) Download the ZIP file, which should be named “firmware163_7.inch.zip” to your PC. (2) Extract all contents to a USB thumb drive compatible with your HAPPY touch screen machine. The result should be a folder single folder called “UpdateFile” on your thumb drive. ((3) Insert the thumb drive into your machine. (4) From the machine’s sewing (drive) screen, navigate to the main menu, press OTHER then VERSION. (5) Press UPDATE and allow the update to complete. (this may take several minutes.) Update is complete when the machine has automatically restarted successfully. Disclaimer: improper firmware update may disable your machine. Read instructions carefully before proceeding, and contact support. Additional note: If your machine does not display an “UPDATE” button on its “VERSION” screen, contact support for an alternate procedure.
 Firmware Update 1.63 for HCH, HCS2 and HCD2Released by Texmac March 23, 2016. Read instructions before proceeding.WARNING: Improper update procedure can temporarily disable your machine. Contact support for any questions. |